This page provides access to the technical drawings, specifications, and load charts for MaxiRig telescopic spreader beams referenced throughout the Cookes lifting catalogue.
Each document contains detailed engineering information including beam dimensions, span adjustments, working load limits (WLL), sling angle load charts, headroom calculations, and connection requirements to support safe rigging design and lift planning.
MaxiRig telescopic spreader beams are designed to provide adjustable lift spans while maintaining controlled load distribution and reduced sling angles, making them suitable for a wide range of lifting applications where flexibility and quick configuration are required.
All MaxiRig beams are proof load tested and manufactured to AS4991-2004, ensuring compliance with recognised lifting equipment standards and providing confidence in demanding industrial lifting environments.
Use the technical drawings below to review beam configuration, span adjustment ranges, connection points, and load capacity at different sling angles before selecting or deploying a beam in the field.
The information contained in these documents is provided for lift planning and reference purposes only.
Always ensure lifting configurations are verified by a competent person and comply with site-specific lifting procedures and applicable standards before performing any lift.
